Description
Hinge Type Stud Terminal Block, M4 sized
TtecSTH4 is a Stud Type terminal block, suitable for 1.5 – 6.0mm2 wires.
TtecSTH Series of Terminal Blocks are preferred for applications where the connections are subjected to severe vibration. The wire is crimped to a ring / fork lug and is screwed onto the flat current bar of the Terminal Block. The fastening nut always remains captive in the hinged plastic carrier. The hinged carrier should be lifted to insert the lugs and then snapped back into position. The nut can then be fastened to complete the connection. The nut can be operated by using a standard screwdriver.
These Terminal Blocks have IP20 (Finger Safe) protection & do not need any additional shrouding.
Two Lugs can be connected to the Terminal, without sacrificing the safety of the Terminal Block.
TtecSTH4 is a Stud Type terminal block, suitable for 1.5 – 6.0mm2 wires.
TtecSTH Series of Terminal Blocks are preferred for applications where the connections are subjected to severe vibration. The wire is crimped to a ring / fork lug and is screwed onto the flat current bar of the Terminal Block. The fastening nut always remains captive in the hinged plastic carrier. The hinged carrier should be lifted to insert the lugs and then snapped back into position. The nut can then be fastened to complete the connection. The nut can be operated by using a standard screwdriver.
These Terminal Blocks have IP20 (Finger Safe) protection & do not need any additional shrouding.
Two Lugs can be connected to the Terminal, without sacrificing the safety of the Terminal Block.