Description
Rimtec RCC800 Low Inertia Capping Clutch
Techna's Hysteresis style Bottle Capping Clutch disengages very smoothly applying highly consistent torque onto the bottle caps. This smooth disengagement within a fully sealed unit increases the life of your machine. Techna's standard design, featuring customised upper and lower flanges, can replace every OEM's headset currently available. Unlike most other disc-style hysteresis clutches, our Techna bottle capping clutch has high resolution and a linear adjustment mechanism with a full 360 degree range.
Features:
• Compact, low inertia design
• Two torque ranges
• Inner and outer magnets are both jacketed with stainless steel
• Ø 8 mm max through hole
• M12, M24 or M35 bottom connection (other connections
available on request)
• Available with a variety of top/bottom adaptors to suit virtually
any capping process
• Very smooth disengagement
• Accurate torque (+/- 10% or less)
• Low inertia, allowing use for higher speeds, e.g. 450 rpm
• Complete stainless-steel construction
• Fully sealed for washdown
• Unique toolless torque adjustment
• Fully linear torque adjustment for 360 degrees or full rotation
• Same clutch size suitable for both lower and higher torque ranges
• Long life and less wear on machine parts
• Low maintenance
• Can be customised for direct replacement of OEM headsets
• Special designs available with larger diameter and larger torque of 20Nm or more
Techna's Hysteresis style Bottle Capping Clutch disengages very smoothly applying highly consistent torque onto the bottle caps. This smooth disengagement within a fully sealed unit increases the life of your machine. Techna's standard design, featuring customised upper and lower flanges, can replace every OEM's headset currently available. Unlike most other disc-style hysteresis clutches, our Techna bottle capping clutch has high resolution and a linear adjustment mechanism with a full 360 degree range.
Features:
• Compact, low inertia design
• Two torque ranges
• Inner and outer magnets are both jacketed with stainless steel
• Ø 8 mm max through hole
• M12, M24 or M35 bottom connection (other connections
available on request)
• Available with a variety of top/bottom adaptors to suit virtually
any capping process
• Very smooth disengagement
• Accurate torque (+/- 10% or less)
• Low inertia, allowing use for higher speeds, e.g. 450 rpm
• Complete stainless-steel construction
• Fully sealed for washdown
• Unique toolless torque adjustment
• Fully linear torque adjustment for 360 degrees or full rotation
• Same clutch size suitable for both lower and higher torque ranges
• Long life and less wear on machine parts
• Low maintenance
• Can be customised for direct replacement of OEM headsets
• Special designs available with larger diameter and larger torque of 20Nm or more
