Description
Push In Terminal Block for 6/10 mm² wire
TtecCP series Push in type Terminal Blocks are the next generation, compact terminals. These series of Terminal Blocks have 1000 V rating as per IEC guidelines. The new CP series terminals have a much wider range for wire terminations.
The wire is held directly against the copper current bar by pre stressed clamps.
The Push button on the top is to be pressed for using flexible cable without lug for connection. Lugged cable can be directly pressed into clamp to make connections.
Cross connection of these Terminal Blocks can be done using insulated push in jumpers available in 2, 3, 4 and 10 pole configurations.
TtecCP series Push in type Terminal Blocks are the next generation, compact terminals. These series of Terminal Blocks have 1000 V rating as per IEC guidelines. The new CP series terminals have a much wider range for wire terminations.
The wire is held directly against the copper current bar by pre stressed clamps.
The Push button on the top is to be pressed for using flexible cable without lug for connection. Lugged cable can be directly pressed into clamp to make connections.
Cross connection of these Terminal Blocks can be done using insulated push in jumpers available in 2, 3, 4 and 10 pole configurations.
