Distribution Blocks

Distribution Blocks
zoom Zoom image

Ttec CDB Distribution Blocks are an ideal choice for a simplified distribution system. A bolt in the centre of the block provides a connection point for the incoming cable. All the terminals are internally connected and provide multiple connection points for the outgoing wires. A protective shield effectively shrouds the incoming connection.

These Distribution Blocks are available in Red, Yellow, Blue, Black and Green.

NOTE: Sum of outgoing currents on either side of the centre should not exceed half the maximum permissible incoming current. Sum of total outgoing currents should not exceed maximum permissible incoming current. Connection for higher outgoing currents should be done through the terminal nearest to the incoming connection.

 

Available in the following sizes:

 

0.2 mm2 to 4 mm2 - Ttec CDB4

CDB4Conductor Cross Section Stranded min: 0.2 mm²
Conductor Cross Section Stranded max: 4 mm²
Wire Size at Input: 16 mm²
Rated Voltage: 800 V
Current Input: 64 A
Total Output (on either side of Input): 32 A
Length: 43 mm
Height with 35 x 7.5 mm DIN-Rail: 46.2 mm

1.5 mm2 to 6 mm2 - Ttec CDB6

CDB6

Conductor Cross Section Stranded min: 1.5 mm²
Conductor Cross Section Stranded max: 6 mm²
Wire Size at Input: 25 mm²
Rated Voltage: 800 V
Current Input: 82 A
Total Output (on either side of Input): 41 A
Length: 48 mm
Height with 35 x 7.5 mm DIN-Rail: 47.8 mm

1.5 mm2 to 10 mm2 - Ttec CDB10

CDB10

Conductor Cross Section Stranded min: 1.5 mm²
Conductor Cross Section Stranded max: 10 mm²
Wire Size at Input: 35 mm²
Rated Voltage: 800 V
Current Input: 114 A
Total Output (on either side of Input): 57 A
Length: 48 mm
Height with 35 x 7.5 mm DIN-Rail: 47.8 mm

6 mm2 to 25 mm2 - Ttec CDB25

CDB25

Conductor Cross Section Stranded min: 6 mm²
Conductor Cross Section Stranded max: 25 mm²
Wire Size at Input: 50 mm²
Rated Voltage: 800 V
Current Input: 150 A
Total Output (on either side of Input): 75 A
Length: 49 mm
Height with 35 x 7.5 mm DIN-Rail: 57.2 mm

 

 

Please download the PDFs below for more information.

Tel: +44 (0) 1923 222 227
Fax: +44 (0) 1923 219 700
Email: This email address is being protected from spambots. You need JavaScript enabled to view it.

Copyright © 2018 Techna International Ltd. All Rights Reserved • Terms of Use

By using our website, you agree to our use of cookies • More Info